取消
清空记录
历史记录
清空记录
历史记录
浏览器自带分享功能也很好用哦~
在线客服
客服一
1.产品概述 / Product Overview
工业级SVG是我公司引进美国技术针对工业应用环境开发的无功补偿装置，模块结构采用立式设计。功率组件采取大容量英飞凌IGBT，器件额定功率选值大于有效值的3倍以上，留有足够大的安全余量，在负载较大冲击下，能长期工作。模块采取轴流风机散热，风量大，风压足，散热好; 整柜采取下进上出风模式，整柜顶部采用轴流风机抽风，底部采取防尘百叶窗进风，可较大程度隔离外部灰尘，能适合高温工业现场及环境恶劣尤其粉尘较大的场合应用。例如：粉体厂、粉石厂、瓷砖厂、水泥厂、钢铁冶炼等。
Industrial SVG is a reactive compensation device developed by Armat introducing American technology for industrial application environment. The module structure is ofvertical design. Infineon large-capacity IGBT is adopted for the power module, and the rated power of the device is more than 3 times the effective value. SVG has an enough safety margin, and can work for a long time under the impact of large load. The module uses the axial flow fan for heat dissipation, with high air flow, sufficient air pressure and good heat dissipation. The whole cabinet adopts the lower air inlet and upper air outlet mode, the axial flow fan is used at the top of the whole cabinet for air draft, and the dustproof shutter is used at the bottom of the whole cabinet for air intake, which can isolate the external dust to a greater extent and be suitable for the high temperature industrial site and harsh environments, especially the environments with much dust, such as powder factory, powder stone factory, ceramic tile factory, cement factory, Iron and steel smelting and so on.
2.工作原理 / Operating Principle
工业级静止无功发生器(简称SVG)是利用可关断大功率电力电子器件(如IGBT)组成自换相桥式电路，经过电抗器并联在电网上。适当地调节桥式电路交流侧输出电压的幅值和相位，就可以使该电路吸收或者发出满足要求的无功电流，实现动态无功补偿的目的。
Industrial static var generator (SVG) uses the high-power power electronic device (such as IGBT) which can be turned off to form a self-commutation bridge circuit to be connected to the power grid in parallel through reactors. By properly adjusting the amplitude and phase of the output voltage at the AC side of the bridge circuit, the required reactive current can be absorbed or emitted by the circuit to achieve the purpose of dynamic reactive compensation.
3.型号说明 / Model Description
4.工业级SVG常用选型表/ General selection table for industrial SVG
|
名称 Name |
型号规格 Model/Specification |
容量 Capacity |
尺寸（W*D*H） Dimensions (W*D*H) |
|
SVG静止无功发生器（模块） Static var generator SVG (module) |
AMT-SVG400/100-4 |
100kvar |
258*563*1383 |
|
AMT-SVG400/150-4 |
150kvar |
||
|
静止无功补偿装置 （机柜） Static var compensator (cabinet) |
AMT-SVG-200/0.4 |
200kvar |
800*1000*2200 |
|
AMT-SVG-250/0.4 |
250kvar |
800*1000*2200 |
|
|
AMT-SVG-300/0.4 |
300kvar |
800*1000*2200 |
|
|
AMT-SVG-450/0.4 |
450kvar |
1000*1000*2200 |
5.技术参数 / Technical Parameters
|
项目 Item |
项目描述 Item Description |
|
|
电气规格 Electrical Specifications |
输入线电压 Input line voltage |
380V或690V（-40～+20%） 380V or 690V (-40 ~ +20%) |
|
相数 Phase number |
3相4线；3相3线 3-phase 4-wire; 3-phase 3-wire |
|
|
频率 Frequency |
50/60±5Hz（可设置） 50/60±5Hz (configurable) |
|
|
补偿容量 Compensation capacity |
100kvar/150kvar (根据机型) 100kvar/150kvar (according to model) |
|
|
并联运行 Parallel operation |
不限 Unlimited |
|
|
模块功耗 Module power consumption |
<2.5kW |
|
|
效率 Efficiency |
高达92%-98% Up to 92%-98% |
|
|
CT变比范围 Range of CT transformation ratio |
150:5～6000:5 |
|
|
通信接口 Communication interface |
干接点 Dry contact |
1个EPO One EPO |
|
通信 Communication |
RS485通讯接口,采用MODBUS远程通讯协议。 RS485 communication interface, using MODBUS remote communication protocol. |
|
|
环境规格 Environment specifications |
使用场所 Application |
室内，不受阳光直晒，无尘埃，腐蚀性、可燃性气体，油雾、水蒸汽、滴水或盐份等 Indoor, free from direct sunlight, dust, corrosive, flammable gas, oil mist, water vapor, water drop or salt, etc. |
|
工作海拔 Altitude |
低于1500米，高于1500米时降额使用。 Lower than 1500 meters. Derate if the altitude is higher than 1500 meters. |
|
|
存储温度 Storage temperature |
-20℃～ +70℃ |
|
|
工作温度 Operating temperature |
-45℃～ +55℃ |
|
|
湿度 Temperature |
小于95％RH，无水珠凝结 Less than 95% RH, no condensation |
|
|
振动 Vibration |
小于5.9米/秒2（0.6g） Less than 5.9 m/s2 (0.6g) |
|
|
结构 Structure |
防护等级 Level of protection |
IP20 |
|
颜色 Color |
白色（可定制） White (customizable) |
|
|
尺寸 Size |
见下节（根据机型） See the following section (according to model) |
|
|
冷却方式 Cooling mode |
风冷（大功率轴流风机） Air cooling (high-power axial flow fan) |
|
1.产品概述 / Product Overview
工业级SVG是我公司引进美国技术针对工业应用环境开发的无功补偿装置，模块结构采用立式设计。功率组件采取大容量英飞凌IGBT，器件额定功率选值大于有效值的3倍以上，留有足够大的安全余量，在负载较大冲击下，能长期工作。模块采取轴流风机散热，风量大，风压足，散热好; 整柜采取下进上出风模式，整柜顶部采用轴流风机抽风，底部采取防尘百叶窗进风，可较大程度隔离外部灰尘，能适合高温工业现场及环境恶劣尤其粉尘较大的场合应用。例如：粉体厂、粉石厂、瓷砖厂、水泥厂、钢铁冶炼等。
Industrial SVG is a reactive compensation device developed by Armat introducing American technology for industrial application environment. The module structure is ofvertical design. Infineon large-capacity IGBT is adopted for the power module, and the rated power of the device is more than 3 times the effective value. SVG has an enough safety margin, and can work for a long time under the impact of large load. The module uses the axial flow fan for heat dissipation, with high air flow, sufficient air pressure and good heat dissipation. The whole cabinet adopts the lower air inlet and upper air outlet mode, the axial flow fan is used at the top of the whole cabinet for air draft, and the dustproof shutter is used at the bottom of the whole cabinet for air intake, which can isolate the external dust to a greater extent and be suitable for the high temperature industrial site and harsh environments, especially the environments with much dust, such as powder factory, powder stone factory, ceramic tile factory, cement factory, Iron and steel smelting and so on.
2.工作原理 / Operating Principle
工业级静止无功发生器(简称SVG)是利用可关断大功率电力电子器件(如IGBT)组成自换相桥式电路，经过电抗器并联在电网上。适当地调节桥式电路交流侧输出电压的幅值和相位，就可以使该电路吸收或者发出满足要求的无功电流，实现动态无功补偿的目的。
Industrial static var generator (SVG) uses the high-power power electronic device (such as IGBT) which can be turned off to form a self-commutation bridge circuit to be connected to the power grid in parallel through reactors. By properly adjusting the amplitude and phase of the output voltage at the AC side of the bridge circuit, the required reactive current can be absorbed or emitted by the circuit to achieve the purpose of dynamic reactive compensation.
3.型号说明 / Model Description
4.工业级SVG常用选型表/ General selection table for industrial SVG
|
名称 Name |
型号规格 Model/Specification |
容量 Capacity |
尺寸（W*D*H） Dimensions (W*D*H) |
|
SVG静止无功发生器（模块） Static var generator SVG (module) |
AMT-SVG400/100-4 |
100kvar |
258*563*1383 |
|
AMT-SVG400/150-4 |
150kvar |
||
|
静止无功补偿装置 （机柜） Static var compensator (cabinet) |
AMT-SVG-200/0.4 |
200kvar |
800*1000*2200 |
|
AMT-SVG-250/0.4 |
250kvar |
800*1000*2200 |
|
|
AMT-SVG-300/0.4 |
300kvar |
800*1000*2200 |
|
|
AMT-SVG-450/0.4 |
450kvar |
1000*1000*2200 |
5.技术参数 / Technical Parameters
|
项目 Item |
项目描述 Item Description |
|
|
电气规格 Electrical Specifications |
输入线电压 Input line voltage |
380V或690V（-40～+20%） 380V or 690V (-40 ~ +20%) |
|
相数 Phase number |
3相4线；3相3线 3-phase 4-wire; 3-phase 3-wire |
|
|
频率 Frequency |
50/60±5Hz（可设置） 50/60±5Hz (configurable) |
|
|
补偿容量 Compensation capacity |
100kvar/150kvar (根据机型) 100kvar/150kvar (according to model) |
|
|
并联运行 Parallel operation |
不限 Unlimited |
|
|
模块功耗 Module power consumption |
<2.5kW |
|
|
效率 Efficiency |
高达92%-98% Up to 92%-98% |
|
|
CT变比范围 Range of CT transformation ratio |
150:5～6000:5 |
|
|
通信接口 Communication interface |
干接点 Dry contact |
1个EPO One EPO |
|
通信 Communication |
RS485通讯接口,采用MODBUS远程通讯协议。 RS485 communication interface, using MODBUS remote communication protocol. |
|
|
环境规格 Environment specifications |
使用场所 Application |
室内，不受阳光直晒，无尘埃，腐蚀性、可燃性气体，油雾、水蒸汽、滴水或盐份等 Indoor, free from direct sunlight, dust, corrosive, flammable gas, oil mist, water vapor, water drop or salt, etc. |
|
工作海拔 Altitude |
低于1500米，高于1500米时降额使用。 Lower than 1500 meters. Derate if the altitude is higher than 1500 meters. |
|
|
存储温度 Storage temperature |
-20℃～ +70℃ |
|
|
工作温度 Operating temperature |
-45℃～ +55℃ |
|
|
湿度 Temperature |
小于95％RH，无水珠凝结 Less than 95% RH, no condensation |
|
|
振动 Vibration |
小于5.9米/秒2（0.6g） Less than 5.9 m/s2 (0.6g) |
|
|
结构 Structure |
防护等级 Level of protection |
IP20 |
|
颜色 Color |
白色（可定制） White (customizable) |
|
|
尺寸 Size |
见下节（根据机型） See the following section (according to model) |
|
|
冷却方式 Cooling mode |
风冷（大功率轴流风机） Air cooling (high-power axial flow fan) |
|
尊龙凯时（江苏）电气有限公司，主要致力于电能质量领域的高低压电力电容器、电抗器、工业级滤波器、SVG等产品的研发、生产及原装进口电容器等产品销售。产品在电力、汽车、造船、冶金、铁路、石油、化工、机场和医院等各领域广泛应用。尊龙凯时现已发展成为一家能够向全球市场和用户提供全系列高低压电容器、电抗器、无功补偿及滤波系统的国际性知名制造商。
苏公网安备 32092402000208号
品牌认证
1345天
已认证
品牌认证
1345天
已认证
尊龙凯时客服